Leak Scan

Sale!
 Placeholder

Leak Scan

99.00 95.00

LeakScan™ is a proprietary, game changing electronic leak detection equipment that helps user/ applicator to himself do the quality assurance without any prior major knowledge of electronics in general. A basic training required to master the equipment is easily provided by ROOFTECH at a very reasonable cost.

Compare

Share this product

BACKGROUND / PROBLEM:

Until now, the waterproofing applicators across the world used to either rely on outdated flood testing method OR ‘third party’ leak detection service providers to do quality assurance of applied waterproofing layers. All, third party services have their own expertise

  • limitations in particular type of quality assurance or troubleshooting procedures or might have ‘regional’ constrains in being able to provide services.

When an applicator goes to a jobsite, he can run into situations where in he needs to detect leaks in

  • different type of waterproofing layers (like membrane, coatings etc.) which are applied,
  • over different type of substrates i.e. exposed horizontal surfaces (like flat roofs) OR more conscientious areas like – parapets and curbs, flashings, and transitions from horizontal to vertical surfaces or vertical surfaces on water tanks etc.
  • He might be expected to do Quality Assurance OR Troubleshoot.

The point is, there can be too many variables! It’s difficult for him to co-­‐ordinate with ‘appropriate’ leak detection service provider who carries a specific equipment which is most appropriate for a jobsite.

Even if he intends to buy the leak-­‐detection equipment himself, besides being vaguely expensive, it’s too difficult logistics wise to handle multiple type of equipment for different scenarios.

SOLUTION:

LeakScan is a proprietary, game changing electronic leak detection equipment that helps user/ applicator to himself do the quality assurance without any prior major knowledge of electronics in general. A basic training required to master the equipment is easily provided by ROOFTECH at a very reasonable cost.

TECHNICAL USP:

LeakScan combines the two most effective and reliable low voltage and non-­‐destructive integrity testing technology like Vector Mapping and Pin-­‐Hole Detector in ONE ergonomic equipment with several advances of modern connectivity & software support for effective report generation. User can choose at his will, the Low Voltage Vector Mapping (wet testing) on large exposed horizontal areas and switch to Pin-­‐hole detector mode on vertical surfaces, transitions, and other areas which not effectively tested with Vector Mapping.

This change over empowers user the confidence to test 100% area on the job site with electric accuracy using one single equipment.

COMMERCIAL USP:

Besides being technically better, LeakScan aims to change the game dramatically in context of affordability and accessibility of a ‘basic’ Quality Assurance tool which should be a ‘must-­‐ have’ in any waterproofing applicator’s tool box !

FEATURED ATTACHMENTS:

  • VECTOR: A sensor plate with eight number of contact probes basically scans the surface resistivity of a dielectric (non-­‐conductive) waterproofing membrane, process the data automatically to derive a VECTOR which basically represent a drop in voltage potential. VECTOR is derived by processing the data that is weighted & averaged amongst all 8 directions of a probe to give an accurate direction indicator on screen which should be followed to reach a leaking point.
  • ROLLER: It is designed to detect discontinuities/ pinholes in a dielectric coatings coating, liner and membrane by utilising a simple fundamentals of checking ‘Resistance’ of the tested layer. Whenever the testing probe (sponge) is passed over a “Pin-­‐hole” or a point of resistance that is equal or lower than the sensitivity threshold set to relate the surface as ‘Leak-­‐proof’, an audible buzzer and red light indicator helps the user to identify breaches in waterproofing / coating layer with current accuracy!

Kit Contents

  • Generator unit
  • Detector unit: IP65 Weatherproof LCD Display Scanner.
  • Reel with 200m of stainless steel wire
  • Red and black connecting lead
  • Extension Pole
  • Featured Attachments: VECTOR
  • Featured Attachments: ROLLER
  • Battery charger and batteries
  • Standard Noise Cancellation Headphones / Bluetooth Headphones (Optional)
  • Shockproof Protective Case
  • Instruction Manual

Specification

  • Output pulse voltage: 32V DC
  • Output power: <10 watts
  • Max relative humidity: 80% non-­‐condensing
  • Altitude: Up to 2000m
  • Temperature range: +4°C to +40°C
  • Mains voltage for charging: 100 to 240V AC 50/60 Hz
  • Weight:

2.1Kg (generator unit incl. batteries) 0.58Kg (detector unit incl. batteries) 17.5Kg (complete kit)

  • Dimensions:

169mm x 80mm x 235mm (generator unit) 189mm x 37mm x 138mm (detector unit) 559mm x 432mm x 266mm (transit case) 559mm x 432mm x 266mm (full kit, packed)

  • Commodity Code:

Disclaimer: Due to ongoing R&D efforts to constantly improvise, all stated information is subject to change without any notice or obligation.

Reviews

There are no reviews yet.

Be the first to review “Leak Scan”