Stage Specific Solutions

Grid List

Showing all 3 results

Electric CENTRIC Vector Mapping Scan

Electric CENTRIC Vector Mapping Scan
6.50 Square Foot

6.50 Square FootBook A Scan

Rated 4.00 out of 5

Electric CENTRIC Vector Mapping Scan

Electric CENTRIC Vector Mapping Scan
6.50 Square Foot
Rated 4.00 out of 5

Electric CENTRIC Vector Mapping helps the user to do the Quality Assurance and Troubleshooting of applied waterproofing membranes and coatings by following the principal of Vector Mapping. The testing procedure has been described as Electric Field Vector Mapping (EFVM) under ASTM D7877 : Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes.

It’s a low voltage, non-­‐destructive testing technology which takes minimum set up and helps user to identify breaches as small as pin-­‐hole with electric accuracy. It makes ‘Flood Testing’ look barbaric and outdated way of doing QA.

PHONICS Scan

PHONICS Scan
6.00 Per Square Foot

6.00 Per Square FootBook A Scan

PHONICS Scan

PHONICS Scan
6.00 Per Square Foot

PHONICS scan as the name suggest, helps the user to do the Quality Assurance and Troubleshooting of applied coatings, liners and membrane principally by use of “AUDIBLE” alarm technology. It’s a low voltage, non-­‐destructive testing technology which takes minimum set up and helps user to identify breaches as small as pin-­‐hole with electric accuracy. Once you use the ‘Audible’ alarm to locate breaches, you are amazed with its simplicity and wonder your judgment over the years to use alternate methods to do quality assurance especially over vertical and sloped surfaces !

Sale!

SmartMembrane

SmartMembrane
60.00 50.00

60.00 50.00Add to cart

SmartMembrane

SmartMembrane
60.00 50.00

SmartMembrane™ is a sensor scrim that is laid directly on the top on any electrically isolating waterproofing layer and underneath any overburden assembly coming on the top of the membrane.  Including SmartMembrane™  in the built up assembly, allows the user to troubleshoot & identify leakages in the ‘concealed‘ waterproofing layer, without the need to remove the overburden ! User has an option of selecting Passive or Active System. Passive System basically leaves SmartMembrane and junction cables at pre-defined locations allowing ROOFTECH technician to plug-in his SmartNode and identify leakages by zonal accuracy. The scanning can be done in a scheduled manner as a part of annual check up or during the instances of leakages upon request of client. Active System does not need a physical presence of a technician to monitor the health of waterproofing layer. Instead, SmartNode are installed in the landscape area at a pre-approved locations which basically collects the data constantly and upload the same on ROOFTECH’s cloud server. This allows the monitoring of waterproofing layers in Real-Time.