Quality Assurance Scan

Rooftech offers Quality Assurance Scan services by testing the Waterproofing membranes by the most suitable Electronic Leak Detection technology. In these services, our team scans the bare (exposed) waterproofing membrane post first application, by measuring a current flow and identify the breaches with pin-point accuracy.

The breaches are marked on site and are documented in a very detailed manner. The client gets a extensive report explaining the pattern of breaches, methods adopted to identify them, X-Y co-ordinates of each and every brach with pin-point accuracy, as picture documentation of all the breaches. Further, a CAD drawing of the tested building is provided depicting all the breaches.

These reports are shared with clients and it authorised applicators. The applicators fixes the breaches in Rooftech’s supervision. These repairs are re-tested to ensure the job done correctly and finally a segment is certified for integrity. Think about the quality of installation of waterproofing membranes now as compared to one that relies on Flood testing for verification…!

Everything is backed with Picture Documentation for the higher management in the office to know entire story on site regarding the way in which ‘waterproofing’ is being treated:

Stop fooling yourself with obsolete ‘Flood Testing’ method, post application of Waterproofing layer. Instead, invest in Electronic Leak Detection Scans. DO IT RIGHT, THE FIRST TIME !

To pre-book your Quality Assurance Scansvisit our ‘Products’ segment. Need assistance in Ordering, visit our FAQsection which shall answer your majority of questions. If you still have questions, we are available 24×7, Contact Us!

Explore our Two Most Selling Quality Assurance Scan for (Exposed) Waterproofing Layers:

CENTRIC VECTOR SCAN: For waterproofing layers applied over Horizontal / Flat Areas / Exposed areas 

Electric CENTRIC Vector Mapping helps the user to do the Quality Assurance and Troubleshooting of applied waterproofing membranes and coatings by following the principal of Vector Mapping. The testing procedure has been described as Electric Field Vector Mapping (EFVM) under ASTM D7877 : Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes.

It’s a low voltage, non-­‐destructive testing technology which takes minimum set up and helps user to identify breaches as small as pin-­‐hole with electric accuracy. It makes ‘Flood Testing’ look barbaric and outdated way of doing QA.

Explore more & Book your Scan today from our Products section.

PHONICS SCAN : For waterproofing layers applied over Vertical / Terminations/ Critical Shapes

PHONICS scan as the name suggest, helps the user to do the Quality Assurance and Troubleshooting of applied coatings, liners and membrane principally by use of “AUDIBLE” alarm technology.

It’s a low voltage, non-­‐destructive testing technology which takes minimum set up and helps user to identify breaches as small as pin-­‐hole with electric accuracy. Once you use the ‘Audible’ alarm to locate breaches, you are amazed with its simplicity and wonder your judgment over the years to use alternate methods to do quality assurance especially over vertical and sloped surfaces !

Explore more & Book your Scan today from our Products section.